Question background: After I reinstalled the system for my colleagues, I wanted to use itDrive the Elf(Network Card Version) Install drivers for the new system, but the title problem always occurs during the installation of the driver wizard. Windows stopped working, which caused it to be unable to install. Finally, after seeing these two methods, disable the network adapter and then install the driver wizard.
ICopy the method first, and then explain the situation
Method 1: The machine is win7 64-bit. At first, I thought the compatibility problem was not enough, but I don’t want to worry about it for a long time. But I found a similar problem on the Internet. It turned out that it was not a system or program problem, but a network problem. I believe that students who have the problem of "Tensafe Microsoft basic application has stopped working" should all share the Internet on the LAN. If so, you have to look at the MTU settings of your router.
1. Access your router address in the browser address bar, such as: 192.168.0.1 or 192.168.1.1 (enter according to your own situation);
2. Enter the username and password (usually admin by default) and enter the router's management interface. Generally, "Advanced Settings" are provided. Find a place like "WAN port settings", set the MTU value to 1000 and save it.
1. Access your router address in the browser address bar, such as: 192.168.0.1 or 192.168.1.1 (enter according to your own situation);
2. Enter the username and password (usually admin by default) and enter the router's management interface. Generally, "Advanced Settings" are provided. Find a place like "WAN port settings", set the MTU value to 1000 and save it.
Method 2: Turn off UAC, the steps are as follows: Open the control panel--Select: User and Account---Select: On/Off UAC--------------------------------------------------------------------------------------
Step 1: Start running --- Find the --administrative template under computer configuration
Step 2: Click ---windows component under the admin template--found on the right---application compatibility
Step 3: Find the Compatibility Engine on the right--Double-click--Change the unconfigured inside to---Enabled
Step 4: Find the Close Program Compatibility Assistant---Double-click----Not configured to---Enabled
Finally, save the application
Step 2: Click ---windows component under the admin template--found on the right---application compatibility
Step 3: Find the Compatibility Engine on the right--Double-click--Change the unconfigured inside to---Enabled
Step 4: Find the Close Program Compatibility Assistant---Double-click----Not configured to---Enabled
Finally, save the application